English
Description
1. Description:
1.It is used for different kinds of modules and applied to the working area subsystem.
2.It uses embedded surface frame, easy to install and disassemble
3.With application of fiber SC/LC simplex, duplex and other different environment installed plate or flush plate.
4. Cable management can be connected without cutting(with express port)
4. Installation:
Wall-mounted installation
Drill 2 holes over the wall based on the size in table 1,place the expansion boltΦ5.5*30,place the box to match up the holes and use bolt to fasten
1.It is used for different kinds of modules and applied to the working area subsystem.
2.It uses embedded surface frame, easy to install and disassemble
3.With application of fiber SC/LC simplex, duplex and other different environment installed plate or flush plate.
4. Cable management can be connected without cutting(with express port)
5.All modules are free of welding.
2.Specification
|
Item |
Technical data |
|
Application |
3.0 x 2.0 mm drop cable or indoor cable |
|
Fiber diameter |
125μm ( 652 & 657 ) |
|
Tight cladding diameter |
250μm & 900μm |
|
Mode of application |
Single mode & duplex mode |
|
Tensile strength |
>50 N |
|
End-use temperature |
-40~+85℃ |
|
Adaptor |
SC & LC |
|
Insertion loss |
≤0.2dB(1310nm & 1550nm) |
|
Output |
4 |
3.Configuration table:
|
Model |
Size |
Max Capacity |
Packing Size |
|
|
|
A*B*C(mm) |
SC |
LC |
100 pcs |
|
QH-ATB-4C02 |
100*80*29 |
4 |
8 |
50*45*30 cm |
Wall-mounted installation
Drill 2 holes over the wall based on the size in table 1,place the expansion boltΦ5.5*30,place the box to match up the holes and use bolt to fasten
